What is the wet scrubber? And how it works?

Dust collectors that use liquid are commonly known as wet scrubbers. In these systems, the scrubbing liquid (usually water) comes into contact with a gas stream containing dust particles. The greater the contact of the gas and liquid streams, the higher the dust removal efficiency. 
There is a large variety of wet scrubbers; however, all have of three basic operations: 
• Gas-Humidification - The gas-humidification process conditions fine particles to increase their size so they can be collected more easily. 
• Gas-Liquid Contact - This is one of the most important factors affecting collection efficiency. The particle and droplet come into contact by four primary mechanisms: 
o Inertial Impaction - When water droplets placed in the path of a dust-laden gas stream, the stream separates and flows around them. Due to inertial, the larger dust particles will continue on in a straight path, hit the droplets, and become encapsulated. 
o Interception - Finer particles moving within a gas stream do not hit droplets directly but brush against them and adhere to them. 
o Diffusion - When liquid droplets are scattered among dust particles, the particles are deposited on the droplet surfaces by Brownian movement, or diffusion. This is the principal mechanism in the collection of submicrometre dust particles. 
o Condensation Nucleation - If a gas passing through a scrubber is cooled below the dewpoint, condensation of moisture occurs on the dust particles. This increase in particle size makes collection easier. 
o Gas-Liquid Separation - Regardless of the contact mechanism used, as much liquid and dust as possible must be removed. Once contact is made, dust particulates and water droplets combine to form agglomerates. As the agglomerates grow larger, they settle into a collector. 
The "cleaned" gases are normally passed through a mist eliminator (demister pads) to remove water droplets from the gas stream. The dirty water from the scrubber system is either cleaned and discharged or recycled to the scrubber. Dust is removed from the scrubber in a clarification unit or a drag chain tank. In both systems solid material settles on the bottom of the tank. A drag chain system removes the sludge and deposits in into a dumpster or stockpile.

 Mayflay Machinery (Huizhou) Co.,Ltd
Contact: Molly Mo
Mob:+86 15119092753 
Whatsapp:+86 15119092753
Skype:+86 151 1909 2753
E-mail: sales01@mayflay.com

评论

发表评论

此博客中的热门博文

Daily maintenance procedures for shot blasting machines

图片
1. Whether the fixing bolts on all the blasting machine and the blasting machine motor are loose, and it is found that the loosening is immediately tightened. 2. The wear of the wear-resistant parts and the shot blasting inside the shot blasting machine, and replace the worn parts in time. 3. Check the blades and replace them when they are half worn. 4. Check if the position of the directional sleeve pointer is correct.   5. Whether the shot blasting machine inspection door is closed. 6. Whether there is air leakage in the dust removal pipe, whether the filter bag in the dust collector is dusty or damaged. 7. There are no accumulations and other debris on the spiral shell and filter screen of the separator and remove it in time. 8. Check that the flow screen of the separator is uniform and forms a full curtain. 9. Is the electronically controlled pill gate closed? 10. Check whether the status of each limit switch and proximity switch is norma...
阅读全文

What is sand blasting machine ? What's function for sand blasting machine ?

图片
What is sand blasting machine ? Sand blasting   is the technique of mechanical surface cleaning which uses compressed air as its power shots the high speed abrasive sand stream to the surface of work piece. Due to the impacting and cutting effect of the abrasive sand, the work piece surface is completely cleaned. At the same time, the surface quality and mechanical performance is greatly improved. It is widely used in a variety of different industries with many diverse purposes. Sand blasting is also used in refurnishing sports part of car, motorcycle, electro mechanical device, etc. It helps in removing surface marks of metal/non-metal items, dumb face and fog treatment processing to enhance the product grade. Sand blasting   is also known as abrasive blasting. It is a process where fine granular sand is applied high pressure against a rough surface keeping in mind the end goal to smooth that surface out. In this process, the abrasive material is pushed,...
阅读全文

What are the different types of blasting?

图片
Blasting is the techniques of removing dust, coating, polishing of different surfaces. There are many types of blasting process available according to the requirement like shot peening blasting. It puts small dents on the surface to give a finish where required and helps in wear resistance of the surface. The different types of blasting: Soda blasting Shot Grit Blasting Steel sandblasting Glass Bead blasting Bristle blasting Water blasting Air Blasting Sand abrasive blasting There is most common way of blasting and we called it sand blasting. It uses small grains of garnet for removing coating or polishing a surface. It is composed with the stream of compressed air that helps in acceleration of the particles while water blasting uses high pressure water guns to clean surfaces. They are available in both big and small sizes so they used in home as well as in industry also. Mayflay High Pressure Manual Abrasive Blast Cabinet Sandblasting Machine: ...
阅读全文